Sunday, February 8, 2009

Completed kerf sanding board

Made from a piece of old oak step leftover from a rennovation, a cedar shingle for the 1.5 degree side and a pine block for the 5 degree side.

Both sides cut to correct angle with a block plane followed by sanding block with 60 grit.

Friday, February 6, 2009

Kerfed linings being glued to back.

Top side already glued. Still have a lot of clamps to make.

Here's a picture of an openback banjo I made a few years ago.

Thursday, February 5, 2009

A journal of my first guitar build. Pictures to come.